


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | 0.2 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Keluaran | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Butiran | NPN output |
| Produk | Compact Size Picking Sensor |
| Bahan | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Padang rasuk | 24.6 mm 0.969 in |
| Perlindungan | IP62 (IEC) |
| Nombor Bahagian | NA1-PK3-J |
| Nama produk | Compact Size Picking Sensor NA1-PK3 |
| Masa tindak balas | 10 ms or less (when interference prevention function is used: 30 ms or less) |
| Julat pengesanan | 30 to 300 mm1.181 to 11.811 in(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Nombor Produk | NA1-PK3-J |
| Mengesan ketinggian | 49.2 mm1.937 in |
| Objek pengesan | ø29 mmø1.142 inor more opaque object(completely beam interrupted object) |
| Voltan bekalan | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Sambungan kabel | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Unsur pemancar | Infrared LED (synchronized scanning system) |
| Tahap pencemaran | 3 (Industrial environment) |
| Rintangan kejutan | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Petunjuk: Pemancar | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up when the job indicator input is Low) |
| Pencahayaan ambien | Incandescent light: 3,000 lx or less at the light-receiving face |
| Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Penggunaan semasa | Emitter: 30 mA or lessReceiver: 50 mA or less |
| Petunjuk: Penerima | Operation indicator: Red LED (lights up when the output is ON)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up when the job indicator input is Low) |
| Rintangan getaran | 10 to 150 Hz frequency, 0.75 mm0.030 in(5 G max.) double amplitude in X, Y and Z directions for two hours each |
| Rintangan penebat | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Bilangan saluran pancaran | 3 beam channels |
| Output: Operasi output | ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output: Kategori penggunaan | DC-12 or DC-13 |
| Pematuhan arahan penandaan CE | EMC Directive, RoHS Directive |
| Output: Perlindungan litar pintas | Incorporated |
| Fungsi pencegahan gangguan | Incorporated (Up to 3 units can be mounted close together.) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi