Dalam Stok Produk Hangat
MINI MCR-2-UI-UI
MINI MCR-2-UI-UI 2902037 PHOENIX CONTACT 3-way signal conditioner with plug-in connection technology and cal..
$0.00USD
3914 dalam stok
Spesifikasi Utama
:1 V ... 5 V (via DIP switch)
ATEX:Ex II 3 G Ex nA IIC T4 Gc X
Warna:gray
Kedalaman:120.5 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 1 V ... 5 V (via DIP switch) | |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| Warna | gray |
| Kedalaman | 120.5 mm |
| Lebar | 6.2 mm |
| Ketinggian | 110.5 mm |
| Pematuhan | CE-compliant |
| Penamaan | Electromagnetic RF field |
| Benang skru | M3 |
| Pelepasan hingar | EN 61000-6-4 |
| Kekebalan bunyi bising | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Bilangan saluran | 1 |
| Bahan perumahan | PBT |
| Bilangan input | 1 |
| Tahap pencemaran | 2 |
| Panjang pelucutan | 10 mm |
| UL, Amerika Syarikat / Kanada | UL 508 Listed |
| Kaedah sambungan | Screw connection |
| Kedudukan pemasangan | any |
| Bilangan output | 1 |
| Penggunaan kuasa | ≤ 800 mW (at IOUT= 20 mA, 9.6 V DC, 600 Ω load) |
| Arus input maksimum | 24 mA |
| Voltan input maksimum | 33 V |
| Litar pelindung | Transient protection |
| Arus keluaran maksimum | 22 mA |
| Isyarat input semasa | 0 mA ... 20 mA (via DIP switch) |
| Tahap perlindungan | IP20 |
| Pengasingan elektrik | Reinforced insulation in accordance with IEC 61010-1 |
| Kategori voltan lampau | II |
| Julat voltan bekalan | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Isyarat input voltan | 0 V ... 5 V (via DIP switch) |
| Arahan pemasangan | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Isyarat keluaran semasa | 0 mA ... 20 mA (via DIP switch) |
| Arus litar pintas | < 32 mA |
| Piawaian/peraturan | EN 61000-4-3 |
| Isyarat keluaran voltan | 0 V ... 5 V (via DIP switch) |
| Had frekuensi (3 dB) | 30 Hz (via DIP switch) |
| Voltan bekalan nominal | 24 V DC |
| Respons langkah (10-90%) | < 8.5 ms (with 30 Hz filter) |
| Voltan penebat yang dinilai | 300 V (effective) |
| Boleh dikonfigurasikan/diprogramkan | Yes |
| Ralat penghantaran maksimum | ≤ 0.1 % (of final value) |
| Penggunaan arus biasa | 25 mA (Current output, at 24 V DC incl. load) |
| Sijil pengelasan | DNV GL 14445-15HH |
| Keserasian elektromagnetik | Conformance with EMC Directive 2004/108/EC |
| Arus input rintangan input | approx. 63 Ω |
| Suhu ambien (operasi) | -40 °C ... 70 °C |
| Arus beban beban/output output | ≤ 600 Ω (at 20 mA) |
| Output voltan beban/output | ≥ 10 kΩ |
| Pekali suhu maksimum | 0.01 %/K |
| Rintangan input voltan input | > 1000 kΩ |
| Voltan ujian, input/output/bekalan | 3 kV (50 Hz, 1 min.) |
| Keratan rentas konduktor fleksibel maks. | 1.5 mm² |
| Keratan rentas konduktor min fleksibel. | 0.2 mm² |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 85 °C |
| Keratan rentas konduktor AWG maksimum, fleksibel | 12 |
| Keratan rentas konduktor AWG minimum, fleksibel | 24 |
| Konduktor tunggal/titik terminal, pepejal, dengan ferrule, maks. | 1.5 mm² |
| Konduktor tunggal/titik terminal, pepejal, dengan ferrule, min. | 0.2 mm² |
| Konduktor tunggal/titik terminal, pepejal, tanpa ferrule, maks. | 2.5 mm² |
| Konduktor tunggal/titik terminal, pepejal, tanpa ferrule, min. | 0.2 mm² |
Penerangan Produk
3-way separation amplifier with plug-in connection technology and calibrated measurement range change for galvanic separation of single-pole and bipolar analogue signals. Input/output configurable via
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Butiran Teknikal
The 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover can be configured using DIP switches and is used for the electrical isolation, conversion, amplification, and filtering of unipolar and bipolar standard and normalized signals. On the input side, the standard analog signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V or -10 ... 10 V, and signals2 ... 10 V, 0 ... 20 V, 4 ... 20 V, 0 ... 24 V, 0 ... 30 V, -5 ... 5 V, -20 ... 20 V, -24 ... 24 V, -30 ... 30 V and -20 ... 20 mA are available. On the output side, 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V, -10 ... 10 V and -5 ... 5 V are possible. There is no need for adjustment following a measuring range changeover. The measuring transducer supports fault monitoring and NFC communication.
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
