Dalam Stok Produk Hangat
MINI MCR-2-RPSS-I-I
MINI MCR-2-RPSS-I-I 2902014 PHOENIX CONTACT Repeater power supply
$0.00USD
3213 dalam stok
Spesifikasi Utama
:0.1 % (of final value in isolator operation)
EMC:A
Nota:When being exposed to interference, there may be minimal deviations.
Jenis:Signal conditioner
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 0.1 % (of final value in isolator operation) | |
| EMC | A |
| Nota | When being exposed to interference, there may be minimal deviations. |
| Jenis | Signal conditioner |
| Warna | gray (RAL 7042) |
| Kedalaman | 119.2 mm |
| Lebar | 6.2 mm |
| Ketinggian | ≤ 2000 m |
| Riak | < 20 mVPP(600 Ω) |
| Komen | Safety measures must be taken to prevent electrostatic discharge. |
| Nota EMC | EMC: class A product, see manufacturer's declaration in the download area |
| Kelembapan | B |
| Kandang | Required protection according to the Rules shall be provided upon installation on board |
| Getaran | A |
| Penebat | Reinforced insulation according to IEC/EN 61010-1 |
| Sijil | CE-compliant |
| Penamaan | Electromagnetic RF field |
| Suhu | B |
| Jenis produk | Repeater power supply |
| Benang skru | M3 |
| Voltan ujian | 3 kV AC (50 Hz, 60 s) |
| Nota perhimpunan | The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. |
| Fungsi HART | Yes |
| Jenis pemasangan | DIN rail mounting |
| Pengenalpastian | II 3 G Ex ec IIC T4 Gc |
| Pelepasan hingar | EN 61000-6-4 |
| Kekebalan bunyi bising | EN 61000-6-2 |
| Keluarga produk | MINI Analog Pro |
| Paparan status | Green LED (supply voltage) |
| Bilangan saluran | 1 |
| Semakan artikel | 12 |
| Bahan perumahan | PBT |
| Voltan bukan beban | < 20 V |
| Bilangan input | 1 |
| Tahap pencemaran | 2 |
| Panjang pelucutan | 10 mm |
| Kaedah sambungan | Screw connection |
| Kedudukan pemasangan | any |
| Bilangan output | 1 |
| Penggunaan kuasa | ≤ 1400 mW (at IOUT= 20 mA, 9.6 V DC, 600 Ω load) |
| Tork pengetatan | 0.5 Nm ... 0.6 Nm |
| Litar pelindung | Transient protection |
| Isyarat input semasa | 0 mA ... 20 mA (isolator operation) |
| Tahap perlindungan | IP20 (not assessed by UL) |
| Pengasingan elektrik | 3-way isolation |
| Kategori voltan lampau | II |
| Julat voltan bekalan | 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Isyarat keluaran semasa | 0 mA ... 20 mA (isolator operation) |
| Pemasangan bekas (EPL) | Gc |
| Piawaian/peraturan | EN 61000-4-2 |
| Had frekuensi (3 dB) | > 1.75 kHz |
| Voltan bekalan nominal | 24 V DC |
| Respons langkah (10-90%) | < 200 µs (typ.) |
| Penerangan tentang input | Sensor circuit |
| Voltan penebat yang dinilai | 300 Vrms |
| Isyarat output arus maksimum | 24 mA |
| Ralat penghantaran maksimum | 0.05 % (of final value in repeater power supply operation) |
| Voltan bekalan pemancar | > 19.5 V |
| Keratan rentas konduktor AWG | 24 ... 12 (flexible) |
| Penggunaan arus biasa | 25 mA (at 24 V DC and in isolator operation) |
| Tingkah laku penghantaran isyarat | In = Out |
| Keratan rentas konduktor tegar | 0.2 mm² ... 1.5 mm² (with ferrule) |
| Keserasian elektromagnetik | Conformance with EMC directive |
| Arus input rintangan input | 68 Ω (+0.7 V for test diode) |
| Suhu ambien (operasi) | -40 °C ... 70 °C |
| Arus beban beban/output output | ≤ 600 Ω (20 mA) |
| Pekali suhu maksimum | 0.0075 %/K |
| Keratan rentas konduktor fleksibel | 0.14 mm² ... 2.5 mm² |
| Kelembapan yang dibenarkan (operasi) | 5 % ... 95 % (non-condensing) |
| Pekali suhu, tipikal | 0.0075 %/K |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 85 °C |
| Pengasingan elektrik antara input dan output | yes |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R24 | HL 1 - HL 2 |
Penerangan Produk
3-way power separator amplifier with plug-in connection technology. HART transparency, 0(4) input signal... 20 mA, 0(4) output signal... 20 mA. The device can be used in both splitter mode and power s
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
