Dalam Stok Produk Hangat
MINI MCR-2-POT-UI-PT
MINI MCR-2-POT-UI-PT 2902017 PHOENIX CONTACT Resistance/potiposition transducer
$0.00USD
4638 dalam stok
Spesifikasi Utama
:Software
EMC:A
Nota:When being exposed to interference, there may be minimal deviations.
Warna:gray (RAL 7042)
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Software | |
| EMC | A |
| Nota | When being exposed to interference, there may be minimal deviations. |
| Warna | gray (RAL 7042) |
| Kedalaman | 119.2 mm |
| Lebar | 6.2 mm |
| Ketinggian | ≤ 2000 m |
| Riak | < 20 mVPP |
| Komen | Safety measures must be taken to prevent electrostatic discharge. |
| Nota EMC | EMC: class A product, see manufacturer's declaration in the download area |
| Kelembapan | B |
| Kandang | Required protection according to the Rules shall be provided upon installation on board |
| Getaran | A |
| Penebat | Reinforced insulation according to IEC/EN 61010-1 |
| Sijil | CE-compliant |
| Penamaan | Electromagnetic RF field |
| Suhu | B |
| Jenis produk | Potiposition transducer |
| Voltan ujian | 3 kV AC (50 Hz, 60 s) |
| Nota perhimpunan | The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. |
| Konfigurasi | DIP switches |
| Jenis pemasangan | DIN rail mounting |
| Pengenalpastian | II 3 G Ex ec IIC T4 Gc |
| Pelepasan hingar | EN 61000-6-4 |
| Kekebalan bunyi bising | EN 61000-6-2 |
| Keluarga produk | MINI Analog Pro |
| Bilangan saluran | 1 |
| Semakan artikel | 14 |
| Petunjuk ralat | Red LED |
| Bahan perumahan | PBT |
| Voltan bukan beban | < 17.5 V |
| Bilangan input | 1 |
| Tahap pencemaran | 2 |
| Julat rintangan | 0 Ω ... 100 Ω |
| Panjang pelucutan | 10 mm |
| Kaedah sambungan | Push-in connection |
| Kedudukan pemasangan | any |
| Bilangan output | 1 |
| Penggunaan kuasa | ≤ 850 mW (at IOUT= 20 mA, 9.6 V DC, 600 Ω load) |
| Litar pelindung | Transient protection |
| Tahap perlindungan | IP20 (not assessed by UL) |
| Pengasingan elektrik | 3-way isolation |
| Kategori voltan lampau | II |
| Julat voltan bekalan | 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Isyarat keluaran semasa | 0 mA ... 20 mA (via DIP switch) |
| Pemasangan bekas (EPL) | Gc |
| Arus litar pintas | < 31.5 mA |
| Piawaian/peraturan | EN 61000-4-2 |
| Isyarat keluaran voltan | 1 V ... 5 V (via DIP switch) |
| Voltan bekalan nominal | 24 V DC |
| Sumber input yang tersedia | 3-wire potentiometer |
| Respons langkah (0–99%) | < 60 ms |
| Voltan penebat yang dinilai | 300 Vrms |
| Paparan voltan operasi | Green LED |
| Isyarat output arus maksimum | 24.6 mA |
| Isyarat output voltan maksimum | 12.3 V |
| Ralat penghantaran maksimum | < 0.1 % (R < 240 Ω = < 0,2 %) |
| Keratan rentas konduktor AWG | 24 ... 12 (flexible) |
| Penggunaan arus biasa | 33 mA (24 V DC) |
| Keratan rentas konduktor tegar | 0.2 mm² ... 2.5 mm² (with ferrule) |
| Keserasian elektromagnetik | Conformance with EMC directive |
| Resolusi, output (arus) | 2 µA |
| Resolusi, output (voltan) | 1 mV |
| Suhu ambien (operasi) | -40 °C ... 70 °C |
| Arus beban beban/output output | ≤ 600 Ω (20 mA) |
| Output voltan beban/output | ≥ 10 kΩ |
| Pekali suhu maksimum | 0.01 %/K |
| Keratan rentas konduktor fleksibel | 0.14 mm² ... 2.5 mm² |
| Kelembapan yang dibenarkan (operasi) | 5 % ... 95 % (non-condensing) |
| Pekali suhu, tipikal | 0.01 %/K |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 85 °C |
| Tingkah laku sekiranya berlaku ralat sensor | configurable |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R24 | HL 1 - HL 2 |
| Sisihan tipikal daripada nilai akhir julat pengukuran | 0.2 % |
Penerangan Produk
Configurable potentiometer position converter with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω at 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Push-in c
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
