


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Aci | Pinion shaft |
| Siri | MBMU |
| Produk | Brushless Motors |
| Ciri-ciri | Position control type.50 W・90 W・130 W, Input power supply for Amplifier: Voltage AC 100 V/200 V, Rated speed 3000 r/min |
| Meterai minyak | without |
| Jisim (kg) | 0.7 |
| Nombor Bahagian | MBMU5AZAB |
| Nama produk | MINAS-BL GP Series |
| Output dinilai | 50 W |
| Kelas perlindungan | IP65 |
| –Perihal Lampiran | Excluding the shaft pass-through section and cable end connector.These motors conform to the test conditions specified in EN standards (EN60529, EN60034-5).Do not use these motors in application where water proof performance is required such as continuous wash-down operation. |
| Dimensi persegi bebibir | 80 mm sq. |
| Kelas penebat motor | 130(B) |
| Tork dinilai (N ⋅ m) | 0.16 |
| Spesifikasi voltan | 100 V/200 V common |
| Julat kawalan kelajuan (r/min) | 30 to 4000* Adjustment of the parameters is necessary depending on the workload conditions. |
| Kelajuan putaran dinilai (r/min) | 3000 |
| –Mengenai kelajuan putaran yang dinilai | Motor shaft speed: to be multiplied by the reduction ratio when the gear head is used. |
| Momen inersia rotor ( x10-4kg ⋅ m²) | 0.12 |
| Tork permulaan (Nilai perwakilan) (N ⋅ m) | 0.24 |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi