

| Parameter | Nilai |
|---|---|
| • WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired. | |
| Pautan | Weld connection |
| nota | to a max. connection section |
| Pengekodan | N |
| Permohonan | Signal |
| Skru Pg | without |
| Jenis benang | M23 |
| Bilangan tiang | 9 |
| Jenis Produk | Circular connectors (cable side) |
| Jenis Pengapit | For standard and ONECLICK quick locking |
| Nota umum | Take into account the derating curve. |
| Pelan pemasukan | 8+1 |
| Bahan gasket | FKM |
| Voltan nominal | 300 V |
| Bahan Perumahan | GD-Zn |
| Kedudukan yang tinggi | 2000 m |
| Kitaran manuver | 100 |
| Tahap pencemaran | 3 |
| Ketinggian pemasangan | 2000 m |
| Arahan keselamatan | WARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property. |
| Suhu malar | 125 °C (DIN EN 60512-9-2 / 1000 h) |
| Kategori Voltan Lebihan | II |
| Arah putaran | standard |
| Jenis Penukaran Kenalan | Thorn |
| Voltan Impuls Saiz | 2.5 kV |
| Diameter Luar Konduktor | 3 mm ... 15 mm (Universal seal) |
| Bahan badan penebat | PBT |
| Sentuhan Isyarat Voltan Terkadar | 300 V |
| Saiz Kenalan Kuasa Arus | 20 A |
| Hubungi DiameterPower Contacts | 2 mm |
| Tahap perlindungan (terlibat) | IP66 / IP68 (2 m / 24 h) |
| Bahagian WayarSentuhan KuasaMaks. | 2.5 mm² |
| Bahagian WayarSentuhan KuasaMin. | 0.08 mm² |
| Suhu ambien (operasi) | -40 °C ... 105 °C (see derating) |
| Diameter HubungiIsyarat kenalan | 1 mm |
| Bahagian wayarSentuhan isyaratMaks. | 1 mm² |
| Bahagian wayarSentuhan isyaratMin. | 0.08 mm² |
| Arus undian untuk setiap sentuhan isyarat | 8 A |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi