Dalam Stok Produk Hangat
IDLC-25-1050
IDLC-25-1050 MEANWELL AC-DC Constant Current LED Driver (CC) with PFC, Output 24VDC / 1.05A, 2 in 1 dimming ..
$0.00USD
3105 dalam stok
Spesifikasi Utama
Nama:IDLC-25-1050
Negeri:New
Format:Box
Siri:IDLC-25
Maklumat Pembekal
MEANWELL
Produk: 6448
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Nama | IDLC-25-1050 |
| Negeri | New |
| Format | Box |
| Siri | IDLC-25 |
| Pemalapan | 0-10V, 1-10V, PWM Signal 10V |
| Kelulusan | CCC, CE, ENEC, UL |
| Kuasa (W) | 25,20 |
| Subformat | IP20 |
| Lebar (mm) | 75.00 |
| Tinggi (mm) | 22.00 |
| Input AC Maks | 295,00 |
| Input AC Min | 90,00 |
| Aplikasi | Lighting |
| Pengilang | MEAN WELL |
| Jenis produk | LED Driver |
| Pengasingan (V) | 3.750,00 |
| Kuasa Puncak (W) | 25.2 |
| Penyambung input | Quick Connector |
| Kekerapan input | 50 Hz, 60 Hz |
| Panjang/Latar Belakang | 110.00 |
| Huraian Panjang | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-295Vca47-63Hz.Output in constant current1050mA.Range of output voltage with current mode constantThe 16.8 to 24vdcaccording to demand load.Power:25,2 W.Efficiency typical:80%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-20ºCup+90ºC.Dimensions (Length x Width x Height):110 x 75 x 22mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. With plastic housing designed for lighting applications in interior. Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDLV.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Penyambung output | Quick Connector |
| Jenis Kemasukan CA | Single-phase |
| Waranti (Tahun) | 3,00 |
| Negara Asal | China |
| Arus keluaran mA | One thousand fifty |
| Keamatan Output Minimum (mA) | 1.050,00 |
| Keamatan Output Maksimum (mA) | 1.050,00 |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Butiran Teknikal
LED driver dimmable.
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
