Waktu Perkhidmatan: Isnin hingga Jumaat 9:00-18:00
HVG-150-15D - HVG-150-15D MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 8.25-15V / 10A, 150W. IP67, Tim..
Dalam Stok Produk Hangat

HVG-150-15D

HVG-150-15D MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 8.25-15V / 10A, 150W. IP67, Tim..

$0.00USD
4137 dalam stok
Spesifikasi Utama
Nama:HVG-150-15D
Negeri:Requires Minimum Quantities
Format:Box
Pemalapan:Smart
Maklumat Pembekal
MEANWELL
MEANWELL
Produk: 6448
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal

Spesifikasi Teknikal

ParameterNilai
NamaHVG-150-15D
NegeriRequires Minimum Quantities
FormatBox
PemalapanSmart
KelulusanUL
Kuasa (W)150,00
SubformatIP67
Lebar (mm)68.00
Tinggi (mm)38.80
Input AC Maks528,00
Input AC Min180,00
AplikasiLighting
PengilangMEAN WELL
Jenis produkLED Driver
Pengasingan (V)3.750,00
Kuasa Puncak (W)One hundred fifty
Penyambung inputCable
Kekerapan input50 Hz, 60 Hz
Panjang/Latar Belakang245.00
Huraian PanjangLED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input rangeEighteen0-528Vca47-63Hz.Output in constant current10A.Range of output voltage with current mode constantApproximately 8.25 to15vdcaccording to demand load.Power:150W.Efficiency typical:89%.Regulation Smart Dimmingprogrammed at the factory.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):245 x 68 x 38,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 15V if load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.The version D with Timer Dimming comes with the curve-regulation of the driver is programmed from the factory according to the customer's specification. Fixed a few periods and some rules of the output and the driver will always use the same curves regardless of the hours that it is turned on. We can set up between 2 and 5 different levels. You can make bends fixed on the basis of a few hours of operation. In this way we can achieve greater energy savings and adjust the brightness levels according to the level of occupation. The programming from the factory cannot be changed.In addition to this setting on the D versions is you can limit the maximum output current, for example if we use a driver 1050mA and you only need to 900mA can be adjusted to the maximum value of the output current.With the version Timer dimming can achieve energy savings most important, always maintaining a level of brightness appropriate and with a stand-alone system that enables us to avoid any maintenance cost.
Penyambung outputCable
Jenis Kemasukan CAThree-phase
Waranti (Tahun)5,00
Negara AsalChina
Arus keluaran mATen thousand
Keamatan Output Minimum (mA)10.000,00
Keamatan Output Maksimum (mA)10.000,00

Penerangan Produk

More details
Ciri-ciri Utama
  • Kualiti gred industri
  • Patuh RoHS
  • Sijil CE
  • Jaminan 1 tahun

Butiran Teknikal

LED driver dimmable with phase input.

Dokumen Produk

Lembaran Data

Spesifikasi teknikal dan data prestasi

Manual Pengguna

Panduan pemasangan dan operasi

Top