Dalam Stok Produk Hangat
HSCH 2,5-3U-TT22TT 9005
HSCH 2,5-3U-TT22TT 9005 1548074 PHOENIX CONTACT PCB base housing, nominal cross-section: 2.5 mm², nominal cu..
$4.00USD
2540 dalam stok
Spesifikasi Utama
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Nota:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Padang:5 mm
Keputusan:Test passed
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Nota | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Padang | 5 mm |
| Keputusan | Test passed |
| Amplitud | 0.35 mm (10 Hz ... 60.1 Hz) |
| Kekerapan | 10 - 150 - 10 Hz |
| Lebar [l] | 17.45 mm |
| Tinggi [t] | 32.9 mm |
| Panjang [l] | 16 mm |
| Susun atur pin | Linear pinning |
| Jarak pin | 5.30 mm |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Kelajuan sapuan | 1 octave/min |
| Jenis produk | PCB headers |
| Diameter lubang | 1.3 mm |
| Jenis pemasangan | Wave soldering |
| Bilangan kitaran | 25 |
| Spesifikasi | IEC 60512-1-1:2002-02 |
| Bilangan baris | 2 |
| Dimensi pin | 0.8 x 0.8 mm |
| Keluarga produk | HSCH 2,5/..-G |
| Tekanan haba | 100 °C/168 h |
| Warna (Perumahan) | black (9005) |
| Bebibir pelekap | without |
| Bahan sentuh | Cu alloy |
| Tekanan menghakis | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Kaedah sambungan | Plug / solder connection |
| Jenis pembungkusan | packed in cardboard |
| Rintangan sentuhan | 2 mΩ |
| Arus nominal IN | 8 A |
| Voltan nominal UN | 320 V |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bahan penebat | PA |
| Bilangan jawatan | 8 |
| Jenis pembungkusan luar | Carton |
| Voltan yang dinilai (II/2) | 600 V |
| Arahan pemasangan: | Refer to the data sheet for the range in the download area. |
| Rintangan sentuh R1 | 2 mΩ |
| Rintangan sentuh R2 | 2.2 mΩ |
| Voltan yang dinilai (III/2) | 320 V |
| Voltan yang dinilai (III/3) | 250 V |
| Panjang pin pateri [P] | 3.8 mm |
| Tempoh ujian setiap paksi | 2.5 h |
| Ciri-ciri permukaan | Tin-plated |
| Kumpulan bahan penebat | I |
| Pin pateri setiap potensi | 1 |
| CTI mengikut IEC 60112 | 600 |
| Voltan lonjakan dinilai (II/2) | 4 kV |
| Bilangan jawatan yang diuji | 4 |
| Kitaran pemasukan/penarikan balik | 25 |
| Voltan lonjakan dinilai (III/2) | 4 kV |
| Voltan lonjakan dinilai (III/3) | 4 kV |
| Suhu ambien (pemasangan) | -5 °C ... 100 °C |
| Suhu ambien (operasi) | -40 °C ... 105 °C (dependent on the derating curve) |
| Voltan penebat yang dinilai (II/2) | 600 V |
| Voltan penebat yang dinilai (III/2) | 320 V |
| Voltan penebat yang dinilai (III/3) | 250 V |
| jarak rambat minimum (II/2) | 3.2 mm |
| Voltan tahan frekuensi kuasa | 2.2 kV |
| jarak rayap minimum (III/2) | 3 mm |
| jarak rayap minimum (III/3) | 3.2 mm |
| Tarik kekuatan setiap pos. lebih kurang. | 4 N |
| Kekuatan pemasukan setiap pos. lebih kurang. | 5 N |
| Kelembapan relatif (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Voltan tahan impuls pada paras laut | 4.8 kV |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 55 °C |
| Indeks penjejakan perbandingan (IEC 60112) | CTI 600 |
| Kawasan pematerian permukaan logam (lapisan atas) | Tin (4 - 8 µm Sn) |
| Pemegang sentuh dalam sisipanKeperluan >20 N | Test passed |
| Rintangan penebat, kedudukan bersebelahan | > 15 TΩ |
| nilai pelepasan minimum - medan bukan homogen (II/2) | 3 mm |
| nilai pelepasan minimum - medan bukan homogen (III/2) | 3 mm |
| nilai pelepasan minimum - medan bukan homogen (III/3) | 3 mm |
| Indeks mudah terbakar wayar bercahaya GWFI mengikut EN 60695-2-12 | 850 |
| Suhu penyalaan wayar bercahaya GWIT mengikut EN 60695-2-13 | 775 |
| Suhu untuk ujian tekanan bola mengikut EN 60695-10-2 | 125 °C |
Penerangan Produk
PCB headers, nominal cross section: 2.5 mm2, nominal current: 8 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Pin, number of rows: 2, number of positions: 8, product
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
