


| Parameter | Nilai |
|---|---|
| Nama (Butiran) | HLG-80H-C700AB |
| Negeri (Butiran) | New |
| Format (Butiran) | Box |
| Siri (Butiran) | HLG-80H-C-AB |
| Kelulusan (Butiran) | CCC, CE, EAC, MM, PSE, RCM, UL |
| Kuasa (W) (Butiran) | 90,30 |
| Peraturan (Butiran) | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Subformat (Butiran) | IP65 |
| Lebar (mm) (Butiran) | 61.50 |
| Tinggi (mm) (Butiran) | 38.80 |
| Input AC Maks (Butiran) | 305,00 |
| Input AC Min (Butiran) | 90,00 |
| Aplikasi (Butiran) | Lighting |
| Pengilang (Butiran) | MEAN WELL |
| Jenis produk (Butiran) | LED Driver |
| Pengasingan (V) (Butiran) | 3.750,00 |
| Kuasa Puncak (W) (Butiran) | 90.3 |
| Penyambung input (Butiran) | Cable |
| Frekuensi input (Butiran) | 50 Hz, 60 Hz |
| Panjang/Latar Belakang (Butiran) | 195.60 |
| Huraian Panjang (Butiran) | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP65.Input range90-305Vca47-63Hz.Output in constant current700mA.Adjustable by external potentiometer (420-700mA).Range of output voltage with current mode constant64 to 129Vccaccording to demand load.Power:90,3 W.Efficiency typical:91,5%.Potentiometer:This model incorporates 1 external potentiometer that allows us to regulate the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,96to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+80ºC.Dimensions (Length x Width x Height):195,6 x 61,5 x 38,8 mm7 years of warranty.Manufacturer: MEAN WELLThis source can work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the sourcein addition to having regulation 1-10V, 10V PWM, or resistance.The series HLG are LED drivers, class I grounded.With metal housing IP65. The series HLG has a high efficiency designed for applications of public lighting, architectural, exterior, interior or any lighting application LED needs a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US. Suitable for LED lighting or LED displays. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Penyambung output (Butiran) | Cable |
| Jenis Kemasukan CA (Butiran) | Single-phase |
| Waranti (Tahun) (Butiran) | 7,00 |
| Negara Asal (Butiran) | China |
| Arus output mA (Butiran) | 400, 450, 500, 550, 600, 650, 700 |
| Keamatan Output Minimum (mA) (Butiran) | 420,00 |
| Keamatan Output Maksimum (mA) (Butiran) | 700,00 |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi