HLG-320H-12C

320W Single Output Switching Power Supply 320W Single Output Switching Power Supply320W Single Output Switching Power SupplyFeatures : Features :Features : HLG-320Hseries HLG-320HseriesHLG-320Hseries Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC)Universal AC input / Full range (up to 305VAC) Built-in active PFCfunction Built-in active PFCfunctionBuilt-in active PFCfunction High efficiencyup to 95% High efficiencyup to 95%High efficiencyup to 95% Protections: Short circuit / Over current / Over voltage / Over temperature Protections: Short circuit / Over current / Over voltage / Over temperatureProtections: Short circuit / Over current / Over voltage / Over temperature Cooling by freeair convection Cooling by freeair convectionCooling by freeair convection OCP point adjustable through outputcable or internal potentiometer OCP point adjustable through outputcable or internal potentiometerOCP point adjustable through outputcable or internal potentiometer IP67 / IP65design for indooror outdoor installations IP67 / IP65design for indooror outdoor installationsIP67 / IP65design for indooror outdoor installations Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires Type HL LED Driver for use in Class I, Division 2 hazardous location luminairesType HL LED Driver for use in Class I, Division 2 hazardous location luminaires Three in onedimmingfunction(1*10Vdc or PWM signalor resistance) Three in onedimmingfunction(1*10Vdc or PWM signalor resistance)Three in onedimmingfunction(1*10Vdc or PWM signalor resistance) Suitable for LED lighting andstreet lighting applications Suitable for LED lighting andstreet lighting applicationsSuitable for LED lighting andstreet lighting applications Compliance to worldwide safety regulations for lighting Compliance to worldwide safety regulations for lightingCompliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location Suitable for dry / damp / wet locationSuitable for dry / damp / wet location 7 years warranty (Note.10) 7 years warranty (Note.10)7 years warranty (Note.10)F110 F110F110M MSELV IP65 IP67 M MSELV IP65 IP67M MSELV IP65 IP67 Bauar t gepr u f t Bauar t gepr u f tBauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma geSicherheit egel ma ge od os od osod os be wacg be wacgbe wacg www. tuv. com www. tuv. comwww. tuv. com ID 2000000000 ID 2000000000ID 2000000000HLG-320H-12A HLG-320H-12AHLG-320H-12A Blank : IP67 rated. Cable for I/O connection. Blank : IP67 rated. Cable for I/O connection.Blank : IP67 rated. Cable for I/O connection. A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer. A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer.A : IP65rated. Outputvoltage and constant current level canbe adjusted through internal potentiometer. B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internalB : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer. potentiometer.potentiometer. D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details. D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details.D (option) : IP67rated. Timer dimmingfunction,contact MEAN WELL for details.SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-42HLG-320H-42 HLG-320H-48 HLG-320H-48HLG-320H-48 HLG-320H-54 HLG-320H-54HLG-320H-54 DC VOLTAGE DC VOLTAGEDC VOLTAGE 12V 12V12V 15V 15V15V 20V 20V20V 24V 24V24V 30V 30V30V 36V 36V36V 42V 42V42V 48V 48V48V 54V 54V54V CONSTANT CURRENT REGION Note.46 ~12V CONSTANT CURRENT REGION Note.46 ~12VCONSTANT CURRENT REGION Note.46 ~12V 7.5 ~ 15V 7.5 ~ 15V7.5 ~ 15V 10 ~ 20V 10 ~ 20V10 ~ 20V 12 ~ 24V 12 ~ 24V12 ~ 24V 15 ~ 30V 15 ~ 30V15 ~ 30V 18 ~ 36V 18 ~ 36V18 ~ 36V 21 ~ 42V 21 ~ 42V21 ~ 42V 24 ~ 48V 24 ~ 48V24 ~ 48V 27 ~ 54V 27 ~ 54V27 ~ 54V RATED CURRENT RATED POWER RATED CURRENT RATED POWERRATED CURRENT RATED POWER 22A 19A15A13.34A 10.7A 8.9A 22A 19A15A13.34A 10.7A 8.9A22A 19A15A13.34A 10.7A 8.9A 264W285W 300W 320.16W321W 320.4W 264W285W 300W 320.16W321W 320.4W264W285W 300W 320.16W321W 320.4W 7.65A 7.65A7.65A 321.3W 321.3W321.3W 6.7A 6.7A6.7A 321.6W 321.6W321.6W 5.95A 5.95A5.95A 321.3W 321.3W321.3W RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-pRIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17V VOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17VVOLTAGE ADJ. RANGE Note.610.8 ~ 13.5V13.5 ~ 17V 150mVp-p 150mVp-p150mVp-p 17 ~ 22V 17 ~ 22V17 ~ 22V 150mVp-p 150mVp-p150mVp-p 21 ~ 26V 21 ~ 26V21 ~ 26V 200mVp-p 200mVp-p200mVp-p 26 ~ 32V 26 ~ 32V26 ~ 32V 250mVp-p 250mVp-p250mVp-p 32 ~ 39V 32 ~ 39V32 ~ 39V 250mVp-p 250mVp-p250mVp-p 38 ~ 45V 38 ~ 45V38 ~ 45V 250mVp-p 250mVp-p250mVp-p 43 ~ 52V 43 ~ 52V43 ~ 52V 350mVp-p 350mVp-p350mVp-p 49 ~ 58V 49 ~ 58V49 ~ 58V OUTPUT OUTPUTOUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGECURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type and C type only Can be adjusted by internal potentiometer A type and C type onlyCan be adjusted by internal potentiometer A type and C type only 11 ~ 22A 11 ~ 22A11 ~ 22A 9.5 ~ 19A 9.5 ~ 19A9.5 ~ 19A 7.5 ~ 15A 7.5 ~ 15A7.5 ~ 15A 6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A 6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A6.67 ~ 13.34A5.35 ~ 10.7A 4.45 ~ 8.9A 3.8 ~ 7.65A 3.8 ~ 7.65A3.8 ~ 7.65A 3.35 ~ 6.7A 3.35 ~ 6.7A3.35 ~ 6.7A 2.97 ~ 5.95A 2.97 ~ 5.95A2.97 ~ 5.95A VOLTAGE TOLERANCENote.33.0% VOLTAGE TOLERANCENote.33.0%VOLTAGE TOLERANCENote.33.0% 2.0% 2.0%2.0% 1.5% 1.5%1.5% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5%2.0%1.5%1.0%0.5%0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full loadSETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)HOLD UP TIME (Typ.) 15ms at full load 230VAC /115VAC 15ms at full load 230VAC /115VAC15ms at full load 230VAC /115VAC VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDCVOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve)PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC input TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC inputTOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC inputINPUT INPUTINPUT EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac) EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac)EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac) 91% 91%91% 91.5% 91.5%91.5% 92.5% 92.5%92.5% 93% 93%93% 93.5% 93.5%93.5% 94% 94%94% 94% 94%94% 94.5% 94.5%94.5% 94% 94%94% 94.5% 94.5%94.5% 94.5% 94.5%94.5% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)AC CURRENT (Typ.) INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A MAX. No. of PSUs on 16AMAX. No. of PSUs on 16A 3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC 3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC3.5A / 115VAC1.65A / 230VAC1.45A / 277VAC COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VACCOLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC CIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VAC CIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VACCIRCUIT BREAKER1 unit (circuit breaker of type B) / 2 units(circuit breaker of type C) at 230VAC LEAKAGE CURRENT LEAKAGE CURRENTLEAKAGE CURRENT <0.75mA / 277VAC <0.75mA / 277VAC<0.75mA / 277VAC OVER CURRENTNote.495 ~ 108% OVER CURRENTNote.495 ~ 108%OVER CURRENTNote.495 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removedSHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTIONOVER VOLTAGE OVER VOLTAGEOVER VOLTAGEOVER TEMPERATURE WORKING TEMP. OVER TEMPERATURE WORKING TEMP.OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITYWORKING HUMIDITY 14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover 14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recoverShut down and latch off o/p voltage, re-power on to recover -40 ~ +70c (Refer to "Derating Curve") -40 ~ +70c (Refer to "Derating Curve")-40 ~ +70c (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing20 ~ 95% RH non-condensing 46.5 ~ 53V 46.5 ~ 53V46.5 ~ 53V 53.5 ~ 60V 53.5 ~ 60V53.5 ~ 60V 59 ~ 65V 59 ~ 65V59 ~ 65V ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATIONENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Note.7 SAFETY STANDARDS Note.7SAFETY STANDARDS Note.7WITHSTAND VOLTAGE WITHSTAND VOLTAGEWITHSTAND VOLTAGE -40 ~ +80c, 10 ~ 95% RH -40 ~ +80c, 10 ~ 95% RH-40 ~ +80c, 10 ~ 95% RH 0.03%/c (0 ~ 50c) 0.03%/c (0 ~ 50c)0.03%/c (0 ~ 50c) 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approvedUL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVACI/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC SAFETY & SAFETY &SAFETY & EMC EMCEMCOTHERS OTHERSOTHERS ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSIONISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria BCompliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B 157.1K hrs min.MIL-HDBK-217F(25c) 157.1K hrs min.MIL-HDBK-217F(25c)157.1K hrs min.MIL-HDBK-217F(25c) 252*90*43.8mm(L*W*H) 252*90*43.8mm(L*W*H)252*90*43.8mm(L*W*H) 1.88Kg; 8pcs/16Kg/0.92CUFT 1.88Kg; 8pcs/16Kg/0.92CUFT1.88Kg; 8pcs/16Kg/0.92CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature.1. All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25c of ambient temperature. 2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.2. Ripple& noise are measured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and loadregulation. 3. Tolerance : includes set up tolerance, line regulation and loadregulation.3. Tolerance : includes set up tolerance, line regulation and loadregulation. 4. Please referto "DRIVING METHODS OF LED MODULE". 4. Please referto "DRIVING METHODS OF LED MODULE".4. Please referto "DRIVING METHODS OF LED MODULE". 5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details. 5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details.5. Derating maybe needed under low inputvoltages. Please check thestatic characteristics for more details. 6. A type and C typeonly. 6. A type and C typeonly.6. A type and C typeonly. 7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18. 7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18.7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18. 8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time. 8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time.8. Length of set up timeis measured at coldfirst start. Turning ON/OFF thepower supply maylead to increase of theset up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 10.Refer to warranty statement. 10.Refer to warranty statement.10.Refer to warranty statement. 11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently 11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to themains. connected to themains.connected to themains. File Name:HLG-320H-SPEC2015-08-19 File Name:HLG-320H-SPEC2015-08-19File Name:HLG-320H-SPEC2015-08-19