Dalam Stok Produk Hangat
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00USD
3584 dalam stok
Spesifikasi Utama
Barang:Specifications
Berat:Net weight: 300 g approx.
Butiran:Controller
Produk:Ultra High-speed Laser Displacement Sensor [CCD Style]
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Berat | Net weight: 300 g approx. |
| Butiran | Controller |
| Produk | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| Aksesori | - |
| Nombor Bahagian | HL-C1C-M |
| Output penggera | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Panjang kabel | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| Nama produk | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| Kadar persampelan | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| Fungsi tahan | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Nombor Produk | HL-C1C-M |
| Voltan bekalan | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Penapis digital | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Petunjuk: GELAP | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| Input ON set sifar | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Penentukuran: Rentang | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Input OFF set sifar | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Penentukuran: Anjakan | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Penggunaan semasa | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| Petunjuk: TERANG | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| Fungsi pengiraan | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Input/output bersiri | RS-232C |
| Kepala sensor Connectale | Maximum 2 sensor heads |
| Output analog: Arus | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| Output analog: Voltan | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| Purata bilangan sampel | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Output penghakiman (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Petunjuk: Pancaran laser | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| Ciri-ciri suhu | plus or minus 0.01 % F.S./degrees |
| Input pemasaan (Pelepasan laser) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| Output penggera: Operasi output | Opened when the amount of light is excessive or insufficient. |
| Output penggera: Perlindungan litar pintas | Incorporated |
| Rintangan alam sekitar: Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| Output penghakiman (O1, O2): Operasi output | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| Rintangan alam sekitar: Suhu ambien | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Rintangan alam sekitar: Rintangan getaran | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| Output penghakiman (O1, O2): Kategori penggunaan | DC-12 or DC-13 |
| Output penghakiman (O1, O2): Perlindungan litar pintas | Incorporated |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
