Dalam Stok Produk Hangat
HC-M-02-MOD-ST
HC-M-02-MOD-ST 1679346 PHOENIX CONTACT HEAVYCON contact insert module, male, 2-pos., axial screw connection
$0.00USD
4329 dalam stok
Spesifikasi Utama
:Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
Lebar:34.2 mm
Ketinggian:41.8 mm
Panjang:14.6 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| Lebar | 34.2 mm |
| Ketinggian | 41.8 mm |
| Panjang | 14.6 mm |
| Siri | HC-M-02 |
| Jeneral | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| Permohonan | Power |
| Jenis produk | Modular contact insert |
| Nota perhimpunan | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| Arus yang dinilai | 40 A |
| Bahan sentuh | Copper alloy |
| Soket heksagon | SW 2 |
| Penomboran kenalan | 1 - 2 |
| Tork pengetatan | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Profil sambungan | 2 |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 2 |
| Voltan lonjakan yang dinilai | 8 kV |
| Kategori voltan lampau | III |
| Teknologi sambungan | Axial screw connection |
| Voltan yang dinilai (III/3) | 1000 V |
| Bilangan slot modul | 1 |
| Keratan rentas konduktor | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Bahan pembawa sentuh | PC |
| Bahan permukaan sentuh | Ag |
| Kitaran pemasukan/penarikan balik | ≥ 500 |
| Keratan rentas sambungan AWG | 12 ... 10 |
| Suhu ambien (operasi) | -40 °C ... 125 °C |
| Sambungan dalam akaun dengan standard | IEC / EN |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Panjang pelucutan wayar individu | 8 mm +1 mm (for 6 mm²) |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
