Dalam Stok Produk Hangat
HC-M-02-AT-M-10
HC-M-02-AT-M-10 1417389 PHOENIX CONTACT Contact insert module
$0.00USD
4833 dalam stok
Spesifikasi Utama
GTIN:4055626112695
Kunci Pesanan:1417389
Halaman katalog:Page 563 (C-2-2017)
Unit pembungkusan:2 pc
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| GTIN | 4055626112695 |
| Kunci Pesanan | 1417389 |
| Halaman katalog | Page 563 (C-2-2017) |
| Unit pembungkusan | 2 pc |
| Negara asal | PL (Poland) |
| Nombor tarif tersuai | 85366990 |
| (Keadaan ambien) | 2 Nm (6 -8 mm²) |
| Kuantiti pesanan minimum | 2 pc |
| Bahan sentuhan (Umum) | Copper alloy |
| Arus yang dinilai (Dimensi) | 40 A |
| Lebar (Data Komersial Utama) | 34.2 mm |
| (Piawaian dan Peraturan) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Ketinggian (Data Komersial Utama) | 34.7 mm |
| Panjang (Data Komersial Utama) | 14.6 mm |
| (Ciri-ciri mekanikal) | The axial screw connection must be established using a 2 mm Allen key (for stranded conductors only) |
| Profil sambungan (Dimensi) | 2 |
| Voltan lonjakan yang dinilai (Dimensi) | 8 kV |
| Nota (Ciri-ciri mekanikal) | For HEAVYCON HC-B6 to B48 housing, snap-in module frame required, axial connection for 2 mm Allen key |
| Warna (Ciri-ciri mekanikal) | light gray |
| Bahan pembawa sentuh (Umum) | PC |
| Bahan permukaan sentuh (Umum) | Ag |
| Voltan yang dinilai (III/3) (Dimensi) | 1000 V |
| Siri (Ciri-ciri mekanikal) | HC-M-02 |
| Berat setiap Keping (tidak termasuk pembungkusan) | 26.150 g |
| Diameter sentuhan (Keadaan ambien) | 4 mm |
| RoHS (Piawaian dan Peraturan) China | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Piawaian dan Peraturan) | Lead 7439-92-1 |
| Tork pengetatan (Keadaan ambien) | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Sambungan (Ciri-ciri mekanikal) | Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. |
| Jenis sentuhan (Ciri-ciri mekanikal) | turned |
| Keratan rentas konduktor (Keadaan ambien) | 2.5 mm² ... 10 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Kaedah sambungan (Ciri-ciri mekanikal) | Axial screw connection |
| Tahap pencemaran (Ciri-ciri mekanikal) | 3 |
| Kitaran pemasukan/penarikan (Keadaan ambien) | ≥ 500 |
| Keratan rentas sambungan AWG (Keadaan ambien) | 12 ... 10 |
| Kategori voltan lampau (Ciri-ciri mekanikal) | III |
| Arahan pemasangan (Ciri-ciri mekanikal) | To ensure correct use, installation in housing with IP54 protection or better is required |
| Bilangan slot modul (Ciri-ciri mekanikal) | 1 |
| Penarafan mudah terbakar mengikut UL 94 (Data bahan) | V0 |
| Suhu ambien (operasi) (Ciri-ciri elektrik) | -40 °C ... 125 °C |
| Panjang pelucutan wayar individu (Keadaan ambien) | 5 mm +1 (2.5 mm² ... 4 mm²) |
| Sambungan dalam acc. dengan standard (Ciri-ciri mekanikal) | IEC / EN |
| Penarafan mudah terbakar mengikut UL 94 (Ciri-ciri mekanikal) | V0 |
Penerangan Produk
Contact insert module, number of poles: 2, power contacts: 2, control contacts: 0, Male, Axial screw connection, 690 V, 40 A, 2.5 mm² ... 10 mm², Application: Power
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
