Dalam Stok Produk Hangat
HBG-160-48B
HBG-160-48B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 48 VDC / 3.3A, IP67, for in- an..
$0.00USD
3463 dalam stok
Spesifikasi Utama
Nama:HBG-160-48B
Negeri:Recommended Model
Format:Box
Siri:HBG-160-B
Maklumat Pembekal
MEANWELL
Produk: 6448
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Nama | HBG-160-48B |
| Negeri | Recommended Model |
| Format | Box |
| Siri | HBG-160-B |
| Pemalapan | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Kelulusan | CCC, CE, ENEC, UL |
| Kuasa (W) | 158,40 |
| Subformat | IP67 |
| Lebar (mm) | 151.68 |
| Tinggi (mm) | 66.50 |
| Input AC Maks | 305,00 |
| Input AC Min | 90,00 |
| Aplikasi | Lighting |
| Pengilang | MEAN WELL |
| Jenis produk | LED Driver |
| Pengasingan (V) | 3.750,00 |
| Kuasa Puncak (W) | 158.4 |
| Penyambung input | Cable |
| Kekerapan input | 50 Hz, 60 Hz |
| Panjang/Latar Belakang | 151.68 |
| Huraian Panjang | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format, round, plastic, patented, waterproof,IP67.Input range90-305Vca47-63Hz.Output in constant current3,3 A.Range of output voltage with current mode constant28,8 @ 48vdcaccording to demand load.Power:158,4 W.Efficiency typical:93%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Diameter x Height):151,68 x 66,5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 48V if the load is powered at constant voltage and does not overcome the maximum output power.With shell circular plastic IP67. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Penyambung output | Cable |
| Jenis Kemasukan CA | Single-phase |
| Waranti (Tahun) | 5,00 |
| Negara Asal | China |
| Arus keluaran mA | Three thousand three hundred |
| Keamatan Output Minimum (mA) | 3.300,00 |
| Keamatan Output Maksimum (mA) | 3.300,00 |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Butiran Teknikal
LED driver dimmable.
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
