

| Parameter | Nilai |
|---|---|
| 7 Nm (Support: EN 62444) | |
| Warna | Brass color |
| Dilindungi | yes |
| Permohonan | EMC |
| Bebas halogen | no |
| Pengilang | BIMED |
| Jenis produk | Cable screw gland |
| Pitch benang | 1.5 mm |
| Nota perhimpunan | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| Diameter lubang | 16.1 mm ... 16.2 mm |
| Semakan artikel | 00 |
| Tork pengetatan | 7 Nm (Union nut) |
| Lukisan dimensi | |
| Tahap perlindungan | IP68 (5 bar, 30 minutes) |
| Bahan pengedap O-ring | Perbunan |
| Saiz sepana, sokongan | 20 mm |
| Reka bentuk, Pelega terikan | A |
| Saiz sepana, nat kesatuan | 20 mm |
| Penarafan kandang (NEMA) | 4X |
| Diameter kabel luaran | 5 mm ... 10 mm |
| Kategori impak kejutan | 6 |
| Jawatan Pengilang | BMEM-E1 |
| Bahan pengedap Pengedap kabel | CR |
| Dimensi sudut heksagon | 22 mm |
| Cincin Mampatan Bahan | PA 6 |
| Bahagian sambungan jenis benang | M16 x 1.5 |
| Bahan untuk sambungan skru | Brass, nickel-plated |
| Pelaksanaan pelepasan ketegangan | A |
| Suhu ambien (operasi) | -40 °C ... 100 °C (static) |
| Panjang benang penyambung | 7 mm |
| Diameter kabel tanpa sarung kabel | 4 mm (Diameter of braided shield) |
| Julat pengapit klip pelega terikan | 6.00 mm ... 10.00 mm (for UL 514 B) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi