Dalam Stok Produk Hangat
FP 0,8/ 32-MV 8,65
FP 0,8/ 32-MV 8,65 1154014 PHOENIX CONTACT SMD knife strip, rated current: 1.7 A, test voltage: 500 VAC, num..
$3.95USD
2564 dalam stok
Spesifikasi Utama
:16.5 mm Tolerance: +1,5 mm (in combination with Range of articles:FP 0,8/...-FV 7,85)
Nota:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Padang:0.8 mm
Proses:Reflow soldering
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 16.5 mm Tolerance: +1,5 mm (in combination with Range of articles:FP 0,8/...-FV 7,85) | |
| Nota | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Padang | 0.8 mm |
| Proses | Reflow soldering |
| Amplitud | 1.5 mm (10 Hz ... 58 Hz) |
| Tahap ESD | (D) electrostatically conductive |
| Kekerapan | 10 - 2000 - 10 Hz |
| Lebar [l] | 16.7 mm |
| Tinggi [t] | 13.75 mm |
| Panjang [l] | 6.1 mm |
| Susun atur pin | Linear pad geometry |
| Bentuk denyutan nadi | Semi-sinusoidal |
| Kelajuan sapuan | 1 octave/min |
| Panjang lap | 1.5 mm |
| Pecutan | 490 m/s² |
| Geometri pad | 0.5 x 2.4 mm |
| Jenis produk | SMD male connector |
| Ketinggian timbunan | 13.5 mm Tolerance: +1,5 mm (in combination with Range of articles:FP 0,8/...-FV 4,85) |
| Voltan ujian | 500 V AC IEC 60512-4-1:2003 |
| Ofset tengah | ± 0.7 mm in longitudinal and transverse direction |
| Penutup kenalan | 0.8 mm |
| Diameter lubang | 0.75 mm |
| Jenis pemasangan | SMD soldering |
| Spesifikasi | IEC 60512-5-2:2002-02 |
| Bilangan baris | 2 |
| Keluarga produk | FP 0,8/...-MV 8,65 |
| Tempoh kejutan | 11 ms |
| Lebar pita [W] | 44 mm |
| Warna (Perumahan) | black (9005) |
| Arahan ujian | X-, Y- and Z-axis (pos. and neg.) |
| Bahan sentuh | Cu alloy |
| Ketinggian yang dipasang | 13.15 mm |
| Toleransi sudut | ± 5 ° in longitudinal and transverse direction (when plugging in) |
| Keratan rentas AWG | (converted acc. to IEC) |
| Jenis pembungkusan | 44 mm wide tape |
| Diameter gegelung [A] | 330 mm |
| Rintangan sentuhan | 25 mΩ |
| Arus nominal IN | 1.7 A IEC 60512-5-2:2002-02 (at 20°C 80-pos.) |
| Nota tentang operasi | The permissible voltage during operation depends on the application, taking into consideration the air clearances and creepage distances within the scope of insulation requirements in accordance with IEC 60664-1. |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bahan penebat | LCP |
| Bilangan jawatan | 32 |
| Jenis pembungkusan luar | Transparent-Bag |
| Rintangan sentuh R1 | 25 mΩ |
| Rintangan sentuh R2 | 25 mΩ |
| Tempoh ujian setiap paksi | 2.5 h |
| Ciri-ciri permukaan | Selective coating |
| Tahap Sensitif Kelembapan | MSL 1 |
| Kumpulan bahan penebat | IIIb |
| CTI mengikut IEC 60112 | 150 |
| Bilangan jawatan yang diuji | 80 |
| Kitaran pemasukan/penarikan balik | 500 |
| [W2] dimensi keseluruhan gegelung | 50.4 mm |
| Suhu pengelasan Tc | 260 °C |
| Suhu ambien (pemasangan) | -5 °C ... 100 °C |
| Suhu ambien (operasi) | -55 °C ... 125 °C |
| Butiran untuk proses pematerian | The items are suitable for assembly on both sides and for overhead soldering. |
| Kelembapan relatif (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Kawasan sentuhan permukaan logam (lapisan atas) | Gold (Au) |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 70 °C |
| Kawasan pematerian permukaan logam (lapisan atas) | Tin (Sn) |
| Ofset aksial dalam arah Y (melintang) | ± 0.3 mm (Tolerance compensation when plugged in) |
| Kawasan sentuhan permukaan logam (lapisan tengah) | Nickel (Ni) |
| Ofset aksial dalam arah X (longitudinal) | ± 0.3 mm (Tolerance compensation when plugged in) |
| Kawasan pematerian permukaan logam (lapisan tengah) | Nickel (Ni) |
| Rintangan penebat, kedudukan bersebelahan | ≥ 5 GΩ |
| Nilai minimum untuk jarak pelepasan dan jarak rayapan | 0.25 mm |
Penerangan Produk
SMD male connector, nominal current: 1.7 A, Test voltage: 500 V AC, number of positions: 32, pitch: 0.8 mm, color: black, contact surface: Gold, contact connection type: Pin, mounting: SMD soldering
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
