Waktu Perkhidmatan: Isnin hingga Jumaat 9:00-18:00
FM-216-AG2-P - FM-216-AG2-P PANASONIC flow sensor FM200, 1000l/min,G1/2 female thread, PNP
Dalam Stok Produk Hangat

FM-216-AG2-P

FM-216-AG2-P PANASONIC flow sensor FM200, 1000l/min,G1/2 female thread, PNP

$0.00USD
4891 dalam stok
Spesifikasi Utama
Barang:Specifications
Berat:Net weight: 155 g approx., Gross weight: 220 g approx.
Butiran:Aluminum body type
Paparan:4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Maklumat Pembekal
PANASONIC
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal

Spesifikasi Teknikal

ParameterNilai
BarangSpecifications
BeratNet weight: 155 g approx., Gross weight: 220 g approx.
ButiranAluminum body type
Paparan4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
ProdukIntegrated Display Type Digital Flow Sensor
BahanEnclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber
LinearitiWithin ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side)
Saiz portG1/2 female thread
PerlindunganIP40 (IEC)
AksesoriCN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc.
Nombor BahagianFM-216-AG2-P
Panjang kabelTotal length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable.
Nama produkIntegrated Display Type Digital Flow Sensor FM-200
KebolehulanganWithin ±1 % F.S.
Input luaranON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more
Nombor ProdukFM-216-AG2-P
Voltan bekalan12 to 24 V DC ± 10 % Ripple P-P10 % or less
Kelembapan ambien35 to 90 % RH, Storage: 35 to 90 % RH
Cecair yang berkenaanClean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2.
Rintangan kejutan100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each
Kaedah penyambunganConnector
Output perbandinganPNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current)
Pembumian kandangFloating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor.
Suhu ambien0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉
Penggunaan semasaNormal mode: 60 mA or less, ECO mode: 40 mA or less
Kadar aliran skala penuh1,000 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa).
Julat tekanan yang dinilai-0.09 to +0.7 MPa
Rintangan getaran10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each
Output voltan analogOutput voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.]
Rintangan penebat10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type)
Julat jaminan ketepatanBi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted.
Ciri-ciri tekananWithin ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side)
Ketahanan voltan1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type)
Ketahanan tekanan1 MPa
Nilai bersepadu yang ditentukan10ℓ
Ciri-ciri suhuWithin ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range)
Output perbandingan: HisteresisWindow comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit)
Pematuhan arahan penandaan CEEMC Directive, RoHS Directive
Output perbandingan: Mod outputOutput OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode
Kadar aliran segera: Julat paparan-1,100 to +1,100 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.).
Output perbandingan: Masa tindak balas50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation
Kadar aliran bersepadu: Julat paparan±9999999 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.).
Output perbandingan: Perlindungan litar pintasIncorporated
Kadar aliran segera: Tetapan dan resolusi paparan1 ℓ/min.
Kadar aliran bersepadu: Tetapan dan resolusi paparan1 ℓ

Penerangan Produk

More details
Ciri-ciri Utama
  • Kualiti gred industri
  • Patuh RoHS
  • Sijil CE
  • Jaminan 1 tahun

Dokumen Produk

Lembaran Data

Spesifikasi teknikal dan data prestasi

Manual Pengguna

Panduan pemasangan dan operasi

Top