


| Parameter | Nilai |
|---|---|
| Fiber amplifierconnector | |
| Barang | Functions |
| Bentuk | Type |
| Fungsi | Power tuning |
| Pra-berwayar | AND/OR output |
| Keluaran NPN | PNP output |
| Tetapan I/O | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| Masa tindak balas | Super-high-speed mode |
| Mod piawai | 1 ms for operation and reset respectively |
| Fungsi pemasa | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Paparan digital | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| Litar pelindung | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| Tetapan sensitiviti | Teaching and digital up/down keys |
| Tahap perlindungan | IEC 60529 IP50 (with protective cover attached) |
| Mod resolusi tinggi | 4 ms for operation and reset respectively |
| Voltan bekalan kuasa | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Penyambung penguat gentian1 | AND/OR output |
| Sumber cahaya (panjang gelombang) | Red LED (650 nm) |
| Kabel PVC 30 cm dengan penyambung palam M8 (4 pin) | E3X-CN21-M3J-2 0.3M |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi