

| Parameter | Nilai |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| Warna | green (RAL 6021) |
| Kedalaman | 56 mm |
| Lebar | 6.2 mm |
| Ketinggian | 80 mm |
| Penebat | Safe isolation: Control side / contact side |
| Permohonan | Universal |
| Jenis produk | Relay Module |
| Benang skru | M3 |
| Nota perhimpunan | in rows with zero spacing |
| Jenis pemasangan | DIN rail mounting |
| Mod operasi | 100% operating factor |
| Keluarga produk | DEK |
| Semakan artikel | 11 |
| Bahan sentuh | AgSnO |
| Pemacu (kekutuban) | polarized |
| Tahap pencemaran | 2 |
| Panjang pelucutan | 8 mm |
| Kaedah sambungan | Screw connection |
| Kedudukan pemasangan | any |
| Tork pengetatan | 0.5 Nm |
| Pemacu dan fungsi | monostable |
| Litar pelindung | Reverse polarity protection; Polarity protection diode |
| Kapasiti pensuisan | 2 A (at 24 V, DC13) |
| Julat voltan input | 19.2 V AC/DC ... 26.4 V AC/DC (20 °C) |
| Nota mengenai permohonan | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Voltan lonjakan yang dinilai | 6 kV |
| Kategori voltan lampau | III |
| Masa pelepasan biasa | 5 ms |
| Piawaian/peraturan | IEC 60947-5-1 |
| Masa tindak balas biasa | 8 ms |
| Jenis pensuisan kenalan | 1 changeover contact |
| Arus masuk maksimum | 10 A (4 s) |
| Arus pensuisan minimum | 10 mA |
| Jenis kenalan suis | Single contact |
| Hayat perkhidmatan mekanikal | approx. 107cycles |
| Voltan input nominal UN | 24 V DC |
| Voltan penebat yang dinilai | 250 V |
| Voltan pensuisan maksimum | 250 V AC/DC |
| Voltan pensuisan minimum | 12 V AC/DC |
| Paparan voltan operasi | Yellow LED |
| Keratan rentas konduktor AWG | 24 ... 14 |
| Mengehadkan arus berterusan | 6 A |
| Arus input tipikal di UN | 9 mA |
| Tarikh pengurusan data terakhir | 02.05.2024 |
| Keratan rentas konduktor tegar | 0.2 mm² ... 2.5 mm² |
| Voltan ujian (Penggulungan/sentuhan) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Suhu ambien (operasi) | -20 °C ... 50 °C |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 2.5 mm² |
| Kadaran gangguan (beban ohm) maks. | 140 W (at 24 V DC) |
| Suhu ambien (penyimpanan/pengangkutan) | -20 °C ... 70 °C |
| Pelesapan kuasa maksimum untuk keadaan nominal | 0.22 W |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi