Dalam Stok Produk Hangat
CEN-60-30
CEN-60-30 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 30VDC / 2A
$0.00USD
4425 dalam stok
Spesifikasi Utama
Nama:CEN-60-30
Negeri:Do not Use for New Designs
Stok:Yes
Format:Box
Maklumat Pembekal
MEANWELL
Produk: 6448
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Nama | CEN-60-30 |
| Negeri | Do not Use for New Designs |
| Stok | Yes |
| Format | Box |
| Siri | CEN-60 |
| Kelulusan | CE, PSE, UL |
| Kuasa (W) | 60,00 |
| Subformat | IP66 |
| Lebar (mm) | 62.50 |
| Tinggi (mm) | 40.50 |
| Input AC Maks | 295,00 |
| Input AC Min | 90,00 |
| Aplikasi | Lighting |
| Pengilang | MEAN WELL |
| Jenis produk | LED Driver |
| Pengasingan (V) | 3.750,00 |
| Kuasa Puncak (W) | Sixty |
| Penyambung input | Cable |
| Kekerapan input | 50 Hz, 60 Hz |
| Panjang/Latar Belakang | 185.00 |
| Huraian Panjang | LED driver.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP66.Input range90-295Vca47-63Hz.Output in constant current2A.Adjustable by external potentiometer (1,5-2A).Range of output voltage with current mode constantFor 22.5 to 30vdcaccording to demand load.Output voltage with current mode constant30vdc.Adjustable by external potentiometer (27-33Vcc).Power:60W.Efficiency typical:90%.Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.Input class I with grounding.Factor corrector, power>0.95to 230vac at full load.Operating temperature range of caseTcfrom-30ºCup+70ºC.Dimensions (Length x Width x Height):185 x 62,5 x 40,5 mm3 years of warranty.Manufacturer: MEAN WELL.The series CEN are LED Drvers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current. The output voltage and the output current can be adjusted byexternal potentiometerslocated in the housing of the source.With metal housing, suitable for LED lighting and signalling mobile in dry environments, humid, and wet conditions. Valid for interior and exterior. This model has a noise and ripple maximum of 2.4 Vp-p, so that should not be used with controllers, just to feed directly into LEDs. Complies with the requirements of security at the global level for lighting. Test burn at 100% load. High reliability with PFC (correction Factor for Power) is active. |
| Penyambung output | Cable |
| Jenis Kemasukan CA | Single-phase |
| Waranti (Tahun) | 3,00 |
| Negara Asal | China |
| Arus keluaran mA | Two thousand |
| Keamatan Output Minimum (mA) | 2.000,00 |
| Keamatan Output Maksimum (mA) | 2.000,00 |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Butiran Teknikal
LED driver.
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
