

| Parameter | Nilai |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Fius | electronic |
| Nota | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| Jenis | Plug-in module |
| Kedalaman | 111.3 mm (incl. DIN rail 7.5 mm) |
| Lebar | 12.4 mm |
| Ketinggian | ≤ 4000 m (amsl) |
| Bahan | PA 6 |
| Kecekapan | > 99 % |
| Jenis produk | Device circuit breakers |
| Penurunan voltan | 0.14 V (at 10 A) |
| Ujian kelembapan | 96 h, 95 % RH, 40 °C |
| Jenis pemasangan | pluggable onto CAPAROC CR… current rail |
| Voltan yang dinilai | 12 V DC |
| Masa penutupan | 5 s (for overload 1.1…1.3 x INat IN≥ 4 A) |
| Pengenalpastian | UL/C-UL Listed UL 508 |
| Keluarga produk | CAPAROC |
| LED saluran dimatikan | off (Channel switched off) |
| LED saluran merah | lit (Channel switched off, over- or undervoltage active) |
| Bilangan saluran | 2 |
| Bilangan slot | 2 |
| Kelewatan menghidupkan | 50 ms (each channel preset by default) |
| Kaedah tersandung | E (electronic) |
| Tahap pencemaran | 2 |
| Kelas perlindungan | III |
| Arus dinilai IN | 10 A DC (per channel) |
| Panjang pelucutan | 10 mm |
| LED saluran hijau | lit (Channel switched on) |
| Kaedah sambungan | Push-in connection |
| Keratan rentas AWG | (converted acc. to IEC) |
| Elemen selamat gagal | 15 A DC (per output channel) |
| Voltan operasi | 10 V DC ... 30 V DC |
| Pelesapan kuasa | typ. 0.6 W (no load at 24 V) |
| Kejutan (pembedahan) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| LED saluran kuning | lit (Channel switched on, channel load > 80% ) |
| Kekuatan dielektrik | 35 V DC (Load circuit) |
| Lukisan dimensi | |
| Rintangan maklum balas | max. 35 V DC |
| Bilangan jawatan | 1 |
| Voltan lonjakan yang dinilai | 0.5 kV |
| Tahap perlindungan | IP20 |
| Beban kapasitif maksimum | ≤ 75000 µF (Depending on the current setting and the short-circuit current available) |
| Fius sandaran yang diperlukan | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| Penurunan suhu | 20 A (Total current at 40°C) |
| LED saluran merah-hijau | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| Mengukur toleransi I | ± 10 % (typ.) |
| Getaran (operasi) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| LED saluran merah-kuning | flashing (Channel is overloaded and is switched off) |
| Pemadaman voltan lampau | ≥ 32.5 V DC (active) |
| Pemadaman voltan bawah | ≤ 8.5 V DC (active) |
| Piawaian/spesifikasi | EN 61000-6-2 |
| Had arus aktif | typ. 2.0 x INat IN≤ 3 A |
| Arus litar tertutup I0 | typ. 25 mA (no load at 24 V) |
| MTBF (IEC 61709, SN 29500) | 11140621 h (at 25 °C with 21 % load) |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Arus yang dinilai (pra-dilaraskan) | 2 A |
| Keratan rentas konduktor tegar | 0.2 mm² ... 4 mm² |
| Suhu ambien (operasi) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 4 mm² |
| Kapasiti pensuisan litar pintas | 300 A |
| Penarafan mudah terbakar mengikut UL 94 | V-0 |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 70 °C |
| Keratan rentas konduktor, fleksibel, dengan ferrule, dengan sarung plastik | 0.25 mm² ... 4 mm² |
| Keratan rentas konduktor fleksibel, dengan ferrule tanpa sarung plastik | 0.25 mm² ... 4 mm² |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi