Dalam Stok Produk Hangat
BCH-500HF-5 GN
BCH-500HF- 5 GN 5445287 PHOENIX CONTACT Housing base,nominal Current: 12 A,rated Voltage (III/2): 320 V,N. º..
$0.00USD
4462 dalam stok
Spesifikasi Utama
Langkah:5 mm
Lebar [l]:35 mm
Tinggi [t]:11.8 mm
Panjang [l]:12 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Langkah | 5 mm |
| Lebar [l] | 35 mm |
| Tinggi [t] | 11.8 mm |
| Panjang [l] | 12 mm |
| Reka Bentuk Pin | Linear Pin Arrangement |
| Pemerhatian | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Pembinaan | Standard |
| Barisan Produk | COMBICON Connectors M |
| Jenis Produk | Printed circuit board base housing |
| Diameter lubang | 1.4 mm |
| Ulasan Artikel | 01 |
| Bilangan baris | 1 |
| Ketinggian Keseluruhan | 8.57 mm |
| Keluarga Produk | BCH-HF |
| Flange pengapit | Overhead clamping (thread) |
| Warna (Perumahan) | off-white green (6019) |
| Bilangan tiang | 5 |
| Bahan sentuh | Cu Alloy |
| Skim Dimensi | |
| Jenis pemasangan | Wave soldering |
| Dimensi Kuil | 1 x 1 mm |
| Tork pengetatan | 0.3 Nm |
| Jenis pembungkusan | Boxed Packaging |
| Arus Nominal IN | 12 A |
| Voltan nominal UN | 320 V |
| Spesifikasi Ujian | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Bahan penebat | PA |
| Panjang Pin Kimpal [P] | 3.23 mm |
| Bilangan potensi | 5 |
| Bilangan sambungan | 5 |
| Voltan nominal (II/2) | 400 V |
| Voltan saiz (III/3) | 250 V |
| Ciri-ciri Permukaan | Galvanically tinned |
| Kumpulan bahan penebat | I |
| CTI mengikut IEC 60112 | 600 |
| Voltan dimensi (III/2) | 320 V |
| Suhu Ambien (Perkhidmatan) | -40 °C ... 100 °C (depending on the rating curve) |
| Suhu Ambien (Pemasangan) | -5 °C ... 100 °C |
| Voltan sementara nominal (II/2) | 4 kV |
| Voltan Penebat Saiz (II/2) | 400 V |
| Voltan sementara nominal (III/2) | 4 kV |
| Voltan sementara nominal (III/3) | 4 kV |
| Voltan Penebat Saiz (III/2) | 320 V |
| Voltan Penebat Saiz (III/3) | 250 V |
| Nilai garisan rayapan minimum (II/2) | 3 mm |
| Kawasan kimpalan permukaan logam (lapisan atas) | Tin (4 - 8 μm Sn) |
| Nilai garisan rayapan minimum (III/2) | 3 mm |
| Nilai garisan rayapan minimum (III/3) | 3.2 mm |
| Bilangan Pin Pateri Setiap Potensi | 1 |
| Pemerhatian mengenai operasi | According to DIN EN 61984, COMBICON connectors are connectors without switching power (COC). In the event of use as prescribed, they must not be plugged in or unplugged under voltage or under load. |
| Voltan sementara dimensi (II/2) | 4 kV |
| Kelas mudah terbakar mengikut UL 94 | V0 |
| Voltan Sementara Pendimensian (III/2) | 4 kV |
| Voltan sementara dimensi (III/3) | 4 kV |
| Kawasan sentuhan permukaan logam (lapisan atas) | Tin (4 - 8 μm Sn) |
| Suhu Ambien (Penyimpanan/Pengangkutan) | -40 °C ... 70 °C |
| Kawasan Sentuhan Permukaan Logam (Lapisan Tengah) | Nickel (1.5 - 4 μm Ni) |
| Kawasan Kimpalan Permukaan Logam (Lapisan Tengah) | Nickel (1.5 - 4 μm Ni) |
| Kelembapan relatif udara (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Suhu ujian kekerasan bola mengikut EN 60695-10-2 | 125 °C |
| Rintangan terhadap arus bocor (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Nilai Minimum Jarak Penebat Udara - Medan Tidak Homogen (II/2) | 3 mm |
| Nilai Minimum Jarak Penebat Udara - Medan Tidak Homogen (III/2) | 3 mm |
| nilai minimum jarak penebat udara - medan bukan homogen (III/3) | 3 mm |
| Nombor kemudahbakaran filamen pijar GWFI mengikut EN 60695-2-12 | 850 |
| Suhu penyalaan filamen pijar GWIT mengikut EN 60695-2-13 | 775 |
Penerangan Produk
Printed circuit board base housing, nominal section: 2.5 mm², color: whitish green, nominal current: 12 A, nominal voltage (III/2): 320 V, contact surface: Tin, contact type: Male, number of potential
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
