B5X-TEMDIS

Eunica Temperature ControllerB5X-TEMDISsmart-house temperature controller with display Developed to fit into wall socket from Elko, Gira and Jung Shows current room temperatureShows outdoor temperatureTurns on/off heating and coolingSet wanted room/floor temperatureEnergy Save through night setback temperature Channel Programming using BGP-COD-BAT Optional floor sensorDelivered with pre-programmed address on I/O 2Delivered with both white and black pushbutton coversNon-activated inputs and backlight indicated by white lightWhite LED and white backlight can be de-activated by internal dip switchesActivated inputs indicated by blue lightGENERAL SPECIFICATIONSChannel programming By BGP-COD-BAT and special cable: GAP-TPH-CAB. After mounting, reprogramming can be done by removing the slim pushbutton cover and connecting the cable to the connector on the back of the switch element.No. of channels2 needed + 3 OptionalChannel assignment I/O 1: Not programmed I/O 2: Pre-programmed to address B2I/O 3: Not programmed I/O 4: Not programmed I/O 5: Not programmedEnclosure Eunica 55 x 55 mechanicsEnvironmentDegree of protectionIP 20Pollution degree 3 (IEC 60664)Operating temperature 0° to +50°C (32° to +122°F) Storage temperature -20° to +70°C (-4° to +158°F)Humidity (Non condensing)20 - 80% Weight 33 gDimensionsEunica (WxHxD) 55 x 55 x 25 mmMax. wire in terminals Max. 2 x 0.75 mm2SUPPLY SPECIFICATIONSPower supply Supplied by smart-houseConsumption (typical)Activated (guidelight OFF)1.5 mA Activated (guidelight ON) 2 mA Not activated (guidelight OFF) 0.6 mA Not activated (guidelightON) 1.1 mATYPE SELECTIONSupply Ordering no.By smart-house busB5X-TEMDISDelivered with both white and black pushbutton covers. Frame not included.Floor sensor BSO-TEMDIG is not included.INPUT SPECIFICATIONSSensor 1 integrated temperature sensor Range 0 - 50°C (32 - 122°F)Precision± 1°CFloor sensor (not included) Temperature range 0 - 50°C (32 - 122°F) Cable length 4 mCable consists of 4 wires:Brown Connect to “+” on Temperature controllerWhiteConnect to “c” on Temperature controllerYellow Connect to “d” on Temperature controllerGreenConnect to “T” on Temperature controllerSee wiring diagramThe floor sensor is an active 4-wire sensor and will only work together with the temperature controller unit.Specifications are subject to change without notice (01.06.2010) - A product of the CARLO GAVAZZI Group