Dalam Stok Produk Hangat
AFP7HSC4T
AFP7HSC4T PANASONIC FP7 High Speed Counter Modul, 4 x 2 phase high speed counter (16MHz/4 multiple), 4 tran..
$0.00USD
4636 dalam stok
Spesifikasi Utama
Barang:Specifications
Produk:FP7 High-speed Counter Units
Nombor Bahagian:AFP7HSC4T
Nama produk:FP7 High-speed Counter
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Produk | FP7 High-speed Counter Units |
| Nombor Bahagian | AFP7HSC4T |
| Nama produk | FP7 High-speed Counter |
| Nombor Produk | AFP7HSC4T |
| Input: Kaedah penebat | Photocoupler insulation |
| Input: Voltan input dinilai | 12 to 24 V DC / 3.5 to 5 V DC |
| Fungsi kiraan: Jenis kaunter | Linear counter / Ring counter |
| Fungsi kiraan: I/O luaran | Control signal input: 8 points (2 points/ch), External output: 8 points (2 points/ch) |
| Fungsi kiraan: Isyarat input | Phases A, B and Z |
| Input: Impedans input: 5 V DC | 390 Ohm (5 V DC) approx. |
| Fungsi kiraan: Julat kiraan | Signed 32-bit (-2,147,483,648 to +2,147,483,647) |
| Input: Impedans input: 24 V DC | 3.0 kOhm approx. |
| Fungsi kiraan: Bilangan kaunter | 4ch |
| Input: Julat voltan penggunaan: 5 V DC | 3.5 to 5.25 V DC |
| Fungsi lain: Fungsi tangkapan | Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured. |
| Fungsi kiraan: Jenis input kaunter | Individual input (Phases A and B): 1 multiple, 2-multipleDirection discrimination input: 1 multiple, 2-multiple2-phase input: 1 multiple, 2-multiple, 4-multiple |
| Input: Tetapan pemalar masa input | None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s |
| Input: Julat voltan penggunaan: 24 V DC | 10.8 to 26.4 V DC |
| Fungsi kiraan: Frekuensi input maksimum | 4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %) |
| Fungsi lain: Fungsi input gangguan | Available (2 points/ch, Max. 8 points/unit)(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number. |
| Input: Voltan ON minimum / Arus ON minimum: 5 V DC | 3.0 V DC / 4 mA |
| Fungsi perbandingan: Fungsi padanan nilai sasaran | Depending on the count direction, sets or resets the output when the counter value reaches the target value. |
| Input: Voltan ON minimum / Arus ON minimum: 24 V DC | 10 V DC / 4 mA |
| Input: Voltan OFF Maks. / Arus OFF Maks.: 5 V DC | 1.0 V DC / 0.5 mA |
| Output luaran: Fungsi output hasil perbandingan | Outputs the result of comparison function. |
| Input: Voltan OFF Maks. / Arus OFF Maks.: 24 V DC | 2.0 V DC / 2 mA |
| Fungsi pengukuran: Fungsi pengukuran frekuensi | Measures the intervals between the variations of count values, and calculates the frequency. |
Penerangan Produk
FP7 Expansion. High Speed Counting Module, 4 Dual Phase Channels, 4 Interrupt Inputs, 4 Configurable SD NPNs (NPNs)
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
