


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Berat bersih | 75 g approx. |
| Jenis output | Transistor |
| Nombor Bahagian | AFP0HPG01T |
| Nama produk | FP0H positioning units |
| Masa permulaan | 0.02 ms or 0.005 ms selectable (Note)Note : The startup time can be changed by the control code setting in the shared memory. The factory setting (default setting) is 0.02 ms. The startup time is the time from the start request to the first pulse output. |
| Mod operasi | E point control (Linear accelerations / decelerations, S accelerations / decelerations)P point control (Linear accelerations / decelerations, S accelerations / decelerations)Home return function (Home search)JOG operation function (Note 1)JOG positioning functionPulser input function (Note 2)• Transfer multiplication ratio (× 1, × 2, × 5, × 10, × 50, × 100, × 500, × 1000)Real-time frequency change functionInfinity output functionNote1 : When selected linear acceleration / deceleration operation, the target speed can be changed during an operation.Note2 : Pulser input function and feedback counter function use the same pulse input terminal, so the both cannot function simultaneously. |
| Nombor Produk | AFP0HPG01T |
| Fungsi lain | The flag to compare the elapsed value is built in. (The timing signal outputs at the optional position during an operation.) |
| Bilangan paksi yang dikawal | 1 axis |
| Bilangan titik yang diduduki | Input 16 points, Output 16 points |
| Pulangan ke rumah: Isyarat input | Home input, Near home input, Over limit input (+), Over limit input (-) |
| Pulangan ke rumah: Isyarat output | Deviation counter clear signal |
| Arahan kelajuan: Julat arahan | 1 pps to 500 kpps(can set in 1 pps.) |
| Antara muka output: Mod output | 1 pulse output (Pulse and Sign), 2-pulse output (CW and CCW) |
| Bekalan kuasa luaran: Voltan | 21.6 to 26.4 V DC |
| Pulangan ke rumah: Kelajuan pulang ke rumah | Speed setting possible (changes return speed and search speed) |
| Arahan kedudukan: Unit arahan | Pulse unit (The program specifies whether Increment or Absolute is used.) |
| Arahan kedudukan: Kiraan denyutan maksimum | Signed 32 bits (-2,147,483,648 to +2,147,483,647 pulses) |
| Fungsi kaunter suapan balik: Mod input | Two-phase input, Direction distinction input, Individual input (transfer multiple available for each.)Note : Pulser input function and feedback counter function use the same pulse input terminal, so the both cannot function simultaneously. |
| Bekalan kuasa luaran: Penggunaan arus | 20 mA |
| Fungsi kaunter maklum balas: Julat boleh kira | Signed 32 bits (-2,147,483,648 to +2,147,483,647 pulses)Note : Pulser input function and feedback counter function use the same pulse input terminal, so the both cannot function simultaneously. |
| Arahan pecutan / nyahpecutan: Jenis lengkung-S | Can select from Sin curve, Secondary curve, Cycloid curve and Third curve. |
| Arahan pecutan / nyahpecutan: Masa pecutan / nyahpecutan | 0 to 32,767 ms (can set in 1 ms) |
| Arahan pecutan / nyahpecutan: Kaedah pecutan / nyahpecutan | Linear acceleration / deceleration, S acceleration / deceleration |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi